Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Calabasas
Chimney repair in Calabasas is rarely just a mortar job. In a city where most homes sit inside the Wildland-Urban Interface, a cracked crown or a failed flue liner is a fire-safety concern as much as a structural one, and the fix has to account for the next Santa Ana wind event, not just the next rain. We know how Calabasas homes are built: the clay-tile roofs, the tall capped flues, the tight gates that slow roof access, and the shared masonry stacks that make one flue’s repair a question about the whole chimney. Call (833) 925-1856 and we’ll book a sweep or inspection with a flat price agreed before we arrive. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Calabasas Homeowners Call Chimney Sweep Encino for Chimney Repair
We work in Calabasas regularly enough to know the difference between a Highlands ranch house and a Mediterranean estate behind a gate in Calabasas Hills, and we price and plan accordingly. Our technicians have up to 9 years of experience, and they inspect first and recommend second: you get a condition report you can read, with photo evidence, before anyone talks about repair. No pressure, no handoff to a second contractor.
We name the materials we use. When a repair calls for a DuraFlex flexible stainless liner or HeatShield ceramic resurfacing, that’s what goes in, and you’ll see the product name on the estimate. On the local side, we understand why Calabasas brush clearance inspectors care about chimney condition, and we can walk you through what a failed spark arrestor or an uncapped flue means for a WUI inspection. Nothing is recommended that the camera evidence doesn’t support, and we’ll tell you plainly when a repair can safely wait.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Calabasas
We cover the full system from crown to firebox, which means the inspection findings and the repair happen with the same team. Here are the repairs Calabasas homeowners ask for most.
Chimney Waterproofing in Calabasas
Waterproofing is the repair that protects every other repair. In Calabasas, hot dry summers pull moisture out of masonry and moderate winters push it back in, and that cycle is what cracks mortar and spalls brick over time. We apply a breathable water repellent that keeps rain out while letting the masonry dry from inside, and it only goes on after the crown and flashing are sound. Coating a chimney that’s still leaking is money wasted.
Mortar Repointing in Calabasas
Repointing means grinding out failed mortar joints and replacing them with fresh mortar matched to the original, not smeared over the top. On Calabasas estate homes, the joints above the roofline take the worst of the sun and the winter rain, and once they recede the brick starts moving. We match mortar composition to the masonry so the repair doesn’t trap moisture or crack the brick face.
Spalling Brick Repair in Calabasas
Spalling is when the face of a brick pops off, usually after water has been getting in behind it for a season or two. We replace the damaged units with matching brick and address the source of the water, which on a clay-tile roof is often the crown or flashing rather than the brick itself. Left alone, spalling brick in a load-bearing stack turns into a rebuilding job.
Flashing Repair in Calabasas
Flashing is the metal seal where the chimney meets the roof, and on Calabasas’s clay-tile roofs it’s the first place water gets in. Tile complicates the seal, so flashing has to be woven into the courses rather than laid on top, and old tar patches don’t hold. We replace failed flashing with proper metal and tie it back into the tile correctly, which stops the leak at the source.
Trusted Brands We Service in Calabasas
Materials matter on a chimney, because the repair has to outlast the weather cycle it was built for. We work with a defined set of professional-grade brands: DuraFlex for flexible stainless liner systems, HeatShield for ceramic liner resurfacing, and Famco and Copperfield for caps, crowns and related components, among others. Naming the brand means you can trace what’s in your chimney and hold it to a manufacturer’s standard rather than an anonymous bulk part. It also means faster turnaround on the repair, since we’re working with systems we know well rather than improvising a fit.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Calabasas Homes
- Cracked crowns and failed flashing on clay-tile roofs. Water gets in at the crown and flashing first, soaking the masonry; repointing alone fails without fixing the crown and waterproofing the stack.
- Shared and adjacent flues in attached estate homes. When one flue in a shared stack is compromised, a neighbor’s appliance can push exhaust or creosote odors back through your damper, so adjacent flues need checking before any relining.
- Rusted original spark arrestors on 1960s-70s ranch homes. Older Highlands and old-town homes often have arrestors that have rusted out or no longer meet WUI code, and a brush-only cleaning leaves the cracked liner behind.
- Third-degree creosote on heavily used fireplaces. The glazed, hardened creosote that builds up with regular winter burning can’t be swept off, and it often signals a flue liner that needs repair rather than just a cleaning.
Pricing for Chimney Repair in Calabasas, CA
Chimney repair in Calabasas typically runs from about $350 to $1,200 for most repointing and flashing jobs, with waterproofing in the $250 to $600 range and a partial rebuild higher. A full chimney rebuild or a reline system can run several thousand dollars, which is why the inspection and written estimate come first. What moves the price: roof pitch and tile access, how much of the stack needs repair, and whether the work is on a shared masonry stack where adjacent flues have to be protected. The written estimate sets the final price, and the estimate itself is free.
We Also Serve Cities Near Calabasas
We work across the west San Fernando Valley and the Santa Monica Mountains, including Topanga, Winnetka, Tarzana and Reseda. If your home is near the Calabasas line, our chimney repair team covers the surrounding area too. For the full range of what we handle, see our Chimney Repair service page, and for local coverage see Calabasas.
Serving Calabasas, CA – Our Local Coverage Area
We serve Calabasas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Calabasas
Yes, it usually is a chimney repair issue in a shared or closely spaced stack. When one flue in a shared masonry stack is cracked or has a failed liner, the pressure balance changes and a neighbor’s appliance can push exhaust or creosote odors back through your damper. A Level 2 inspection that checks the adjacent flues, not just yours, is the right first step. Call (833) 925-1856 for an exact quote; estimates are free.
Because the water source was never fixed. Tuckpointing replaces failed mortar, but if the crown is cracked or the flashing is leaking, rain keeps soaking the masonry and the new joints fail within a season or two. The permanent fix is crown repair plus flashing plus a breathable waterproofing coat, done in that order. Call (833) 925-1856 and we’ll inspect and show you where the water is getting in.
Yes, annual inspection is still worth it in Calabasas even with light burning, because the risk here is structural and fire-related rather than purely creosote buildup. The dry summers and Santa Ana winds mean a cracked crown or failed spark arrestor matters for WUI safety, and the surrounding Santa Monica Mountains make ember intrusion a real concern during fire season. Call (833) 925-1856 to book an inspection; the estimate is free.
Yes. A rusted or non-compliant spark arrestor is a repair item, and on 1960s-70s ranch homes in the Highlands and old town it’s common because the original units have rusted out or no longer meet WUI code. It’s usually replaced alongside any needed cap or crown work rather than on its own. Call (833) 925-1856 for an exact quote; estimates are free.
Third-degree creosote is the glazed, hardened layer that forms when creosote bakes onto the flue over repeated fires, and it can’t be swept off, so it’s a repair problem. It often means the flue liner is compromised or needs HeatShield ceramic resurfacing, and leaving it in place during fire season raises the risk of a chimney fire. An inspection tells you which it is. Call (833) 925-1856 for an exact quote; estimates are free.
If your chimney needs attention, call Chimney Sweep Encino at (833) 925-1856 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, with a flat price agreed before we book.
Written by the team at Chimney Sweep Encino.