Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Beverly Hills
If the crown on top of your Beverly Hills chimney is cracked or the cap has pulled loose, we can help. We work on the masonry stacks that sit above so many of the older homes here, from Spanish Colonial Revival and Tudor properties in the Flats to the mid-century moderns up in Trousdale Estates, and we’ll give you a written estimate before any work starts. Call (833) 925-1856. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Local knowledge matters on cap and crown work. A crown that fails here often fails because of how the ground has moved over the decades, not because of weather alone. We’re familiar with the neighborhoods and the housing stock, and we know which calls are structural and which are just wind and wear.
Why Beverly Hills Homeowners Call Chimney Sweep Encino for Chimney Cap & Crown
We’ve built a solid local reputation in Beverly Hills by doing the diagnostic work first and recommending second. When a homeowner in the Flats calls about a crack or a draft, we go up top, look at the crown and cap, and run a camera down the flue before anyone talks about money. What we find decides the conversation, not the other way around.
Our technicians have up to 9 years of experience with masonry crowns, custom caps, and multi-flue caps, and they name the materials they’re using rather than quoting a mystery part. That matters to Beverly Hills customers who are careful about what goes on their homes and who want to know whether a recommendation is a coating or a rebuild, and why. We tell you what we find, in plain terms, and we say plainly when a repair can safely wait.
Response time to Beverly Hills is straightforward: we book your sweep or inspection, and because the work here is driven by the condition of the masonry and the flue rather than by heating season, there’s no reason to rush into a job you haven’t seen evidence for. The estimate is free, and the local pro we connect you with is licensed and insured as the state requires.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Beverly Hills
Our chimney cap & crown team handles the top of the system and the parts that protect it, and we cover inspections, repairs, and installations in the same visit when it makes sense. Here’s what each service involves in a Beverly Hills home.
Cap Installation
A properly sized cap keeps birds, bees, and debris out of a flue that sits idle for months at a time in our dry winter. On a Beverly Hills stack we fit the cap to the actual flue opening, not the nearest stock size, and we add a spark-arrestor screen because the Santa Ana wind periods and surrounding wildfire risk make exterior spark containment a real concern.

Cap Replacement
Original caps on 1920s and 1940s homes here are often rusted through or pulled loose at the seam, especially after years of ground movement. When we replace one we set it level and seal the joint so water runs off instead of down onto the clay flue liner below.

Crown Repair
This is the most common structural call we get in Beverly Hills. Decades of shaking have cracked crowns and spalled their edges on the original masonry stacks, and a failed crown is a water problem long before it’s a creosote problem. We rebuild the crown with a proper slope and overhang so it sheds water away from the flue, and we always show you the crack and the cause on camera before we quote the work.

Crown Coating
When the crown is cracked but still sound, a coating can extend its life without a full rebuild. We use HeatShield ceramic resurfacing for liner restoration, and we’re honest about the difference: a coating buys time on a stable crown, and it doesn’t fix spalling or a crown that’s already come apart. You’ll see the condition and the evidence before we recommend either route.
Trusted Brands We Service in Beverly Hills
We name the materials we install, and on this kind of work you’ll see Copperfield components for caps and crowns, DuraFlex flexible stainless-steel liner systems when a reline turns out to be necessary, and HeatShield ceramic resurfacing for liner restoration. Naming the brand gives you traceability and manufacturer-backed quality instead of anonymous bulk parts, and it lets you check the product yourself. We don’t claim to stock parts locally; what we do is specify the right brand for your flue and get it in without turning a crown repair into a rebuild you didn’t need.
Common Chimney Cap & Crown Problems We See in Beverly Hills Homes
- Cracked or spalling crowns on original masonry. The 1920s to 1940s stacks common in the Flats often have mortar crowns that cracked from years of seismic movement, and a cracked crown lets water straight onto a clay flue liner.
- Missing or loose caps on idle flues. With light, sporadic use and long dry stretches, an open flue becomes a home for birds, bees, and debris, and a cap that’s pulled loose does nothing to stop it.
- Undersized or rusted multi-flue caps. Remodeled mid-century stacks in Trousdale Estates frequently serve gas logs the original multi-flue cap was never sized for, so it rusts or fits badly.
- Water reaching the liner. Between the crown and the cap, water finds its way down, and because these fireplaces often burn gas-log or duratrac sets for show, a smoky draft or a nest in a cold flue is often the first sign something’s wrong up top.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Beverly Hills, CA
Pricing here is per job and set by the written estimate, but you should know the ranges before you call. A typical crown coating in Beverly Hills runs $350 to $700. Crown repair, where a section is rebuilt or a crown is refinished with proper slope and overhang, typically runs $700 to $1,500. A custom or multi-flue cap for an odd-shaped or remodeled stack usually runs $450 to $1,100, and a standard cap installation runs $250 to $550. What moves the number is the shape and size of the crown, access to the stack, and whether the flue liner underneath turns out to need work too. We don’t recommend any of that without camera evidence you can see, and if the crown can safely wait, we’ll tell you. Call (833) 925-1856 for a free estimate.
We Also Serve Cities Near Beverly Hills
We serve Beverly Hills and the neighborhoods around it, including West Hollywood, Westwood, Toluca Lake, and Sherman Oaks. The housing stock changes a little as you move across the hills, but the diagnostic approach doesn’t: crown and cap condition first, camera evidence second, repair only when it’s warranted. If you’re just over the line from Beverly Hills, call and we’ll book you in.
Serving Beverly Hills, CA – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Beverly Hills
It depends on the crown’s condition, and we answer that question with a camera, not a guess. A crown with hairline cracks but sound mortar is often a candidate for a coating that buys years of life. A crown with spalled edges or sections that have come apart needs rebuilding, because a coating over failing masonry won’t hold. On the stucco-clad stacks common in the Flats, we look closely at how much has shed before recommending anything. Call (833) 925-1856 for an exact quote – estimates are free.
The most common cause is a cap or crown problem, or a cold, blocked flue, rather than the firebox itself. Many Beverly Hills fireplaces run gas logs year-round, and a loose cap, a nest in the flue, or a crown that’s let water in can all change how the fire drafts. We run a camera down the flue to find out which before recommending work. Call (833) 925-1856 for an exact quote – estimates are free.
If your stack is an odd shape or a multi-flue setup, a custom cap usually fits better than a stock one. The remodeled mid-century stacks in Trousdale Estates often serve gas logs the original cap was never sized for, and a custom cap seals correctly instead of sitting loose. We measure the actual opening and build to it. Call (833) 925-1856 for an exact quote – estimates are free.
You see the evidence yourself before anyone quotes a price. We put a camera down the flue and show you the cracked crown, the spalling mortar, or the gap where a cap has pulled loose, so the recommendation follows what’s actually there. If the work can safely wait, we say so. That’s the honest condition report an inspection is for. Call (833) 925-1856 for an exact quote – estimates are free.
Yes, because in Beverly Hills the risk here is structural and water-driven more than soot-driven. Light use means modest creosote, but decades of ground movement crack crowns and loosen caps, and a flue that sits idle for months invites nests and debris. An inspection is a standalone diagnostic, not a sales funnel, and it tells you honestly whether the full system is safe. Call (833) 925-1856 for an exact quote – estimates are free.
Book Your Beverly Hills Chimney Cap & Crown Estimate
If your crown is cracked, your cap is loose, or you just want to know what condition the top of your stack is in, call us. We’ll show you what we find, recommend only what the evidence supports, and tell you when work can wait. Call (833) 925-1856 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. The local pro we connect you with is licensed and insured as the state requires.
Written by the team at Chimney Sweep Encino.