Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Encino Homeowners
Encino’s warm, dry summers and mild, rainy winters put the top of your chimney through a steady cycle. The crown is the concrete or masonry cap that slopes water away from the flue, and the cap is the metal, mesh, or cabinet piece above it that keeps rain, birds, and debris out. When either one cracks or rusts through, water reaches the masonry, the firebox, and eventually the liner. That’s why the top of the chimney deserves a real look, not a glance from the driveway.
Our technicians have up to 9 years of experience diagnosing exactly this layer of the system. We inspect first and recommend second, so you get a plain-language report of what we find before anyone talks about repairs. We work with professional-grade components from names like Copperfield and Famco, and we install flexible stainless DuraFlex liner systems when the flue needs work too. If something looks off up top, call (833) 925-1856. We answer 24/7, and fast dispatch runs from 7am to 7pm.
What Our Chimney Cap & Crown Service Includes
Cap Installation
A chimney cap is the first line of defense against water, animals, and wind-blown debris entering the flue. If your chimney has no cap at all, installing one is the single most cost-effective step you can take to protect the interior of the system. We measure the flue and the crown, choose a cap sized and secured to fit properly (single-flue or multi-flue), and anchor it so it stays put through Santa Ana wind events.

Cap Replacement
Caps fail slowly and quietly: the mesh rusts, seams pull apart, legs work loose, and the top plate warps or lifts. Once the mesh is compromised, animals and sparks can move freely, and a lifted cap lets rain straight into the flue. We remove the failed cap, check the flue tile and crown underneath for damage the old cap may have masked, and install a replacement matched to your flue size and your home’s look.

Crown Repair
The crown is the sloped concrete or masonry surface at the very top of the chimney, and its job is to shed water away from the flue and the brick or stone below. Hairline cracks are common in our climate, but once a crack widens or the crown separates from the flue tile, water gets in and the damage grows from the inside. We repair failed crowns by cleaning out the old material, rebuilding the slope where needed, and sealing the flue-to-crown joint so water runs off rather than in.

Crown Coating
Some crowns are structurally sound but covered in surface cracks that will only worsen if left alone. A crown coating is a flexible, weather-resistant membrane applied over a prepared surface to seal those cracks and extend the life of a crown that doesn’t need full replacement. We prep the surface, apply the coating to the manufacturer’s spec, and check that the slope still drains correctly. It’s a repair that buys time and protects the masonry below.
Multi-Flue Cap
Many Encino homes have a chimney with two or more flues side by side, and each one needs its own protected opening. A multi-flue cap is a single cabinet-style cover that spans the whole chimney top, protecting every flue at once while leaving the mesh screens accessible. We build and fit these to the actual footprint of your chimney so the cap covers the crown without trapping moisture or blocking the flues.
Custom Cap
When a chimney is an unusual size, has an irregular crown, or the homeowner wants a specific look, a stock cap won’t fit correctly. A custom cap is fabricated to the measurements of your chimney so it sits level, seals against the crown, and matches the proportions of the house. We take the measurements on site, and we walk you through the options for material and finish before anything is made.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Cap & Crown
We name the materials we use, and we know how each of them holds up. Copperfield is a name we trust for chimney caps and related components; we know where their seams and fasteners tend to wear over time and how to install them so the cap performs as intended. Famco is another brand we work with regularly for caps and top-of-chimney components, and we understand the differences between their models well enough to tell you which one fits your flue. On the liner side, we work with DuraFlex flexible stainless systems, and HeatShield ceramic resurfacing is a product-specific process we’re certified to perform when the liner needs restoration rather than replacement.
Whether your existing cap is a Copperfield, a Famco, or another make, we can help. We aren’t a dealer and we don’t claim to stock OEM parts; what we do is assess what’s there, explain what’s failing, and install a component matched to your chimney. If you have a brand you want us to look at specifically, tell us when you call and we’ll take a look during the inspection. Restore, don’t just sweep is how we think about this layer of the system.
Signs You Need Chimney Cap & Crown Right Now
- Water stains on the ceiling or chimney breast. A failed crown or a missing cap lets rain into the masonry, and the stain usually shows up well below the roofline. Catching it early keeps the repair to the top of the chimney instead of the interior walls.
- A cracked or crumbling crown. Visible cracks, spalling concrete, or a crown pulling away from the flue tile all mean water has a path in. Even a hairline crack can widen through a rainy season, so it’s worth checking each fall.
- Birds, squirrels, or debris in the flue. An open or damaged cap gives animals a way in, and nesting material in the flue is a fire hazard. A secure, correctly sized cap closes the opening without blocking the draft.
- Rust, loose mesh, or a lifted top plate on the cap. These are signs the cap is past its useful life. A loose or warped cap can come off in high wind and leave the flue fully exposed.
- Sparks or embers visible on the roof. A cap with the wrong mesh or a missing spark screen lets embers out onto shingles. This one is worth addressing promptly, especially before burning season.
Our Chimney Cap & Crown Process – Step by Step
- 1
Roof-level inspection. We get up to the chimney and look at the crown, the cap, the flue tiles, and the flashing. We take photos and note the condition of each piece, so you’re seeing what we see rather than a verbal summary.
- 2
Flue check from below. If the cap or crown damage may have let water in, we check the flue and firebox from the inside to see whether the liner was affected. This is where a standalone inspection pays off; nothing gets recommended before we know the condition of the whole system.
- 3
Plain-language findings and estimate. We tell you what we find, what can safely wait, and what needs attention before burning season. The written estimate sets the price, line by line, and we don’t start work until you approve it.
- 4
The repair or installation. Crown repair, coating, cap installation, or a full multi-flue cap build goes in per the manufacturer’s spec. We work with the materials we’ve named and confirm the fit and seal before we close out the job.
- 5
Final check and photo report. We confirm the crown slopes correctly, the cap is secure, and the flue is clear. You get a photo report of the finished work, and a record of the condition so you can track it for future inspections.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Encino?
A typical cap installation in Encino runs $300 – $650 depending on flue size and cap material. A multi-flue or custom cabinet cap usually lands higher, in the $700 – $1,400 range, because it’s built to the footprint of the chimney. Crown repair generally runs $450 – $1,100 depending on how much of the crown needs rebuilding and whether the flue-to-crown joint needs resealing. A crown coating is usually the lower end of that, in the $350 – $700 range, because it seals existing cracks rather than rebuilding the crown.
What affects the price: the size and shape of the chimney, the material of the cap or crown, whether the flue tile is damaged, and access to the roof. What’s included in a free estimate: the inspection findings, the photos, and a written per-job price. We don’t quote over the phone and we don’t pad the estimate to cover work you don’t need. If something can wait, we say so.
The Crown-to-Firebox Coverage is the same crew on the same visit, so if the inspection turns up a firebox or liner issue, we can handle it without a handoff. Call (833) 925-1856 for an exact quote; estimates are free.
Chimney Cap & Crown Near Encino – Our Service Area
We serve Encino and the surrounding neighborhoods, including Tarzana, Sherman Oaks, Lake Balboa, Valley Village, and Topanga. If you’re nearby, a chimney cap & crown job is easy to schedule, and dispatch runs from 7am to 7pm, Sunday through Friday. For related work in those areas, see our chimney cap & crown page for Lake Balboa or the chimney cap & crown page for Valley Village. Our main Chimney Sweep Encino page covers the full range of services, and the chimney cap & crown overview explains how we handle every layer of the system.
Serving Encino, CA – Our Local Coverage Area
We serve Encino and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in Encino
A chimney cap is the cover above the flue that keeps out rain, animals, and debris; the crown is the sloped concrete or masonry surface at the top of the chimney that sheds water away from the flue and masonry. Together they’re the part of the system that takes the most weather and protects everything below. In Encino’s climate, both get a lot of sun and rain cycling, which is why we check them at every inspection.
Most cap installations are a few hours, and crown repair or coating is usually a single visit. A custom or multi-flue cap takes longer because it’s measured and fabricated to your chimney. We give you a time window when we schedule and confirm on the day if anything changes.
Typical ranges are $300 – $650 for a cap installation, $700 – $1,400 for a multi-flue or custom cap, $450 – $1,100 for crown repair, and $350 – $700 for a crown coating. The written estimate sets the final price after we’ve inspected. Call (833) 925-1856 for an exact quote; estimates are free.
Yes, we service Copperfield and Famco caps and components, along with other makes. We inspect what’s there, explain what’s failing, and install a replacement matched to your flue and crown. We don’t claim to stock OEM parts, but we can source the right component for your chimney.
Same-day service is often possible when the schedule allows, and a chimney cap & crown issue is worth calling about as soon as you spot it. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday, so a call outside dispatch hours is booked into the next opening.
Ask for the guarantee in writing on your estimate before you approve the job. We go over what’s covered and for how long as part of the estimate conversation. If something isn’t right with the installation, call us and we’ll take a look.
Clear access to the fireplace and the roof edge if possible, and move anything breakable away from the hearth. If you have a prior inspection report or photos of the chimney, have them handy so we can compare. Otherwise, just be ready to tell us what you’ve noticed; we take it from there.
Schedule Your Chimney Cap & Crown Service in Encino Today
If your crown is cracked, your cap is rusted or missing, or you’d simply like to know the top of your chimney is sound before burning season, call (833) 925-1856. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free and there’s no obligation. We inspect first, name the materials we use, and tell you what we find.
Written by the team at Chimney Sweep Encino.