Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Beverly Hills
Most chimney repair calls we take in Beverly Hills aren’t about heavy burning. They’re about old masonry that’s been quietly moving for decades. The Spanish Colonial Revival and Tudor homes in the Flats and Trousdale Estates were built in the 1920s through the 1940s, and many still carry their original brick stacks, clay flue tile, and stucco skins. Seismic shaking and years of dry Santa Ana wind take a toll on that assembly. We work across Beverly Hills with a camera and a written report before anyone recommends a thing. Call (833) 925-1856. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What sets our approach apart is simple: inspect first, recommend second. Nothing gets sold to you without camera evidence you can look at yourself.
Why Beverly Hills Homeowners Call Chimney Sweep Encino for Chimney Repair
Homeowners here are detail-oriented, and rightly so. When a chimney sits on a house worth what a Beverly Hills house is worth, “trust me” isn’t a diagnostic. Our technicians have up to 9 years of experience, and they’ll explain what a camera is showing and what a particular repair is designed to fix before you agree to anything.
We treat the chimney as a full system, from the firebox to the crown, so an inspection finding doesn’t turn into a referral to a second contractor. Repairs, relining, crown work, and flashing all get handled by the same crew.
We know this city’s building stock. A technician working the Flats learns to read a stucco-clad 1920s stack the way you’d read a brick one: where the mortar has gone soft, where the crown has pulled away from the flue, where a hairline crack in the stucco is really water getting into the masonry behind it. That knowledge comes up on nearly every call in Beverly Hills.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Beverly Hills
Repair work in Beverly Hills tends to fall into a few categories, and the fix for each is different. Here’s what we actually do.
Mortar Repointing
Original mortar joints on 1920s-40s stacks weather out over time, and once they’re recessed enough, water gets straight into the brick. Repointing means cutting out the failed mortar and packing in fresh material matched to the original. We use professional-grade product lines like Copperfield for this work so the repair holds up in the same conditions the original joint failed in.
Spalling Brick Repair
Spalling is brick that’s delaminating or flaking off in layers, usually because moisture got in and worked on the face of the brick over a dry season. On older Beverly Hills stacks this is common at the crown and just below it, where rain runs off the top. We replace the failed brick and address the source of the water, not just the symptom.
Chimney Waterproofing
With long dry fire seasons followed by occasional rain, a masonry chimney here cycles between bone dry and wet, and every hairline crack lets water in. A breathable waterproofing treatment on the exterior masonry helps slow that cycle without trapping moisture inside. It’s a small job that buys time on original 1920s-40s stacks.
Flashing Repair
Flashing is the metal where the chimney meets the roof, and when it pulls away or rusts through, water tracks down the stack and into the house. On the stucco walls and low-pitch roofs common in parts of Trousdale Estates, bad flashing is easy to miss from the ground. We check it as part of the inspection and repair it where it’s failing.
We also rebuild chimneys where the damage has gone too far for patching. If a stack needs to come down and go back up, that’s a full reconstruction, not a resurface. Our chimney repair team will tell you plainly which category you’re in.
Trusted Brands We Service in Beverly Hills
We work with a defined set of professional chimney product brands rather than anonymous bulk parts, so you know what’s going into your chimney and where it came from. For relining, that means DuraFlex flexible stainless systems and HeatShield ceramic resurfacing. For masonry and components, Copperfield and Famco show up regularly in our work. If you ask what’s being installed, you’ll get a specific product name, not a generic answer. The materials are part of the job, not a detail you have to chase down afterward.
Common Chimney Repair Problems We See in Beverly Hills Homes
- Cracked clay flue tiles from seismic movement. Decades of earthquakes have flexed original flues enough to crack the tiles, and those cracks are often invisible from the firebox. A Level 2 camera inspection is what finds them, and what they let through into the wall cavity is the reason we don’t skip that step.
- Spalling brick and soft mortar on original 1920s-40s stacks. Dry Santa Ana wind and occasional rain work on the same masonry year after year, and mortar joints go first. Once the joint is recessed, the brick behind it starts to fail.
- Stucco-clad chimney pots and smoke chambers cracking after shaking. Spanish Revival homes carry stucco over masonry, and that stucco cracks and sheds after nearby earthquakes. The visible crack is a draft problem and a water-intrusion point at the same time.
- Appliances vented into flues never sized for them. Gas logs and modern appliances often get connected to an original stack without checking the flue size or condition. That’s a venting mismatch, and a camera inspection is how you find out before it becomes a carbon monoxide concern.
Here’s how a typical call goes. A homeowner in a 1930s Spanish Colonial Revival notices stucco cracking on the stack after a minor earthquake and a smoky draft when using the gas log. A qualified technician runs a Level 2 inspection with a camera, finds a cracked clay flue liner and deteriorated mortar joints, and recommends relining with a HeatShield or DuraFlex system, repointing the mortar, and rebuilding the crown to keep water out. That’s a shape of job we see again and again in Beverly Hills, and the recommendation comes after the evidence, not before it.
That’s the part of this work we care about most. Old masonry is unforgiving of guesswork, and the wrong recommendation on a stack like this is expensive to undo.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Beverly Hills, CA
Estimates here are per job and set by the written estimate, and the estimate itself is free. Typical ranges for the work we do most in Beverly Hills:
- Mortar repointing on a chimney stack: roughly $600 to $1,800, depending on how much of the stack needs cutting out.
- Spalling brick repair: typically $350 to $1,200.
- Chimney waterproofing: around $300 to $700 for a standard exterior masonry stack.
- Flashing repair: generally $300 to $900.
- Chimney rebuilding, where the damage has gone past patching: typically $4,000 to $12,000 for a full teardown and rebuild.
These are typical estimates, not quotes. The written estimate after inspection is what sets the final price. What moves the number is access to the stack, how far the damage has spread, and the specific system chosen for a reline. We tell you what we find, show you the camera footage, and price the repair from there.
We Also Serve Cities Near Beverly Hills
Our service area covers Beverly Hills and the neighborhoods around it, including Beverly Hills, West Hollywood, Westwood, Toluca Lake, and Sherman Oaks. Same camera-first approach, same materials, same crew handling inspection and repair. If you’re just outside the city line, give us a call and we’ll confirm coverage.
Serving Beverly Hills, CA – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Beverly Hills
You know by looking at it with a camera, not by guessing from the firebox. A Level 2 inspection sends a camera up the flue and shows you the tile joints, any cracks, and any gaps where gas or creosote byproducts could escape into the wall cavity. If the tiles are sound, we say so. If they’re cracked from decades of seismic movement, we’ll show you the footage before recommending a HeatShield or DuraFlex reline. Call (833) 925-1856 for an exact quote – estimates are free.
A smoky draft in a fireplace you rarely burn with is almost always a venting or stack problem, not a soot problem. On gas-log sets, the flue may be undersized for the appliance, the smoke chamber may be out of shape, or the stack may have a crack pulling air from the wrong place. A camera inspection identifies which one it is. Call (833) 925-1856 to schedule one.
Once a year is the standard, even for a gas-log fireplace that sees little real burning. Creosote isn’t the concern in a decorative set; nests, debris, cracked tiles, and water intrusion are, and those build up whether you burn or not. The dry months here mean a chimney can sit idle long enough for birds and bees to move in. Call (833) 925-1856 for an exact quote – estimates are free.
Look for visible cracks in the stucco, mortar joints that have receded so the brick stands proud, and any brick face that’s flaking or delaminating. On the Flats, stucco cracking on a Spanish Revival stack often shows up after minor shaking. If you see any of those, get it looked at before the next rain. Call (833) 925-1856 for an exact quote – estimates are free.
Yes, a spark arrestor screen is still worth having on a gas-log chimney, because the risk here isn’t from your fire. With wildfire risk across the Santa Ana wind periods, an open flue is an entry point for embers and debris, and a screen and proper cap close it off. We check the cap and screen as part of a standard inspection. Call (833) 925-1856 for an exact quote – estimates are free.
Get Your Beverly Hills Chimney Inspected Before Anything Else
If you’re hearing a smoky draft, seeing stucco cracks, or you simply don’t know the condition of a 1920s-era stack, start with an inspection. We’ll show you the camera footage, name the materials we’d use, and tell you honestly when a repair can wait. Call (833) 925-1856 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Encino.