Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Beverly Hills
Beverly Hills homes rarely have a heavy heating problem. They have a chimney-system problem dressed up as decoration. That’s why our chimney sweep work here leans on inspection and diagnosis as much as brushing. Our technicians have up to 9 years of experience reading the kind of stacks you find in the Flats and Trousdale Estates, and we connect you with a local pro who is licensed and insured as their state requires. The sweep is booked in advance with a flat price agreed before we lock in the appointment, and a camera inspection with a photo report comes with it. Call (833) 925-1856. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Beverly Hills Homeowners Call Chimney Sweep Encino for Chimney Sweep
What sets our work apart in Beverly Hills is that we inspect first and recommend second. A chimney inspection here stands on its own as a diagnostic service, not a warm-up to a repair quote, and we tell you what we find in plain language before any work is discussed.
We name the materials we use, which matters to Beverly Hills homeowners who ask exactly what’s going into their house. That means a DuraFlex flexible stainless-steel liner system where relining is needed, HeatShield ceramic resurfacing where the existing liner can be restored, and Copperfield components at the top of the stack. You’ll get a photo report you can look at yourself rather than a verbal claim you have to take on faith.
We cover the whole system from crown to firebox, so findings from an inspection don’t get handed to a second contractor. Our technicians have up to 9 years of experience, and the local pros we connect you with know the difference between a 1920s clay flue tile and a mid-century prefab insert by looking at it. For chimney sweep work in Beverly Hills, that distinction is most of the job.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Sweep Services in Beverly Hills
Level 2 Inspection
A Level 2 inspection in Beverly Hills is the service most decorative fireplaces actually need. It uses video scanning to look inside the flue, chimney breast and smoke chamber, so a cracked clay liner from decades of seismic movement gets found before it shows up as a drafting problem. We treat this as a standalone report with photos, not a sales funnel.

Creosote Removal
Creosote removal in Beverly Hills is usually a modest job, because most of these fireplaces see light, sporadic use in a mild climate. The risk here is the chimney that sat idle for months, which is where glazed third-degree creosote can still accumulate in a wood-burning flue that’s been run hard in short bursts. We scrape and brush the flue, then show you the condition on camera before we call it done.

Fireplace Cleaning
Fireplace cleaning on a Beverly Hills property is often about the smoke chamber and the stucco chimney breast rather than the firebox floor. Gas-log sets that run for show leave soot staining and smoke marks on decorative finishes when the damper isn’t sized right. We clean the firebox, smoke chamber and damper assembly, and we’re careful with original tile and plaster surrounds.

Soot Removal
Soot removal here frequently means clearing a cold flue that’s collected bird nests, bees or debris during the long dry season. A smoky draft in a Spanish Revival fireplace that hasn’t burned wood in years is often a disconnected or rusted damper combined with a nest blocking the flue. We remove the debris, check the damper, and fit a top-sealing cap where intrusion keeps happening.
Trusted Brands We Service in Beverly Hills
We work with a defined set of professional brands rather than anonymous bulk parts, and we tell you which one applies to your chimney before anything is ordered. DuraFlex covers flexible stainless relining where the existing flue can’t be restored. HeatShield handles ceramic resurfacing inside a liner that’s still structurally sound. Copperfield components are what we reach for at the crown and cap. Famco is there for the fireplace side of the system. None of it sits in a warehouse waiting; the materials are specified per job and installed by the same crew that ran the inspection, so turnaround stays tight.
Common Chimney Sweep Problems We See in Beverly Hills Homes
- Gas-only fireplaces that never get inspected. A decorative gas-log set runs for years without anyone looking up the flue, so a cracked clay liner or spalling mortar goes unnoticed until a draft problem or water intrusion shows up. Annual NFPA 211 inspection is the only way to catch it early.
- Smoke staining on decorative surfaces. Running gas logs without a properly sized flue or a fully open damper pushes smoke into the smoke chamber, and the soot lands on plaster and stucco. That staining is a drafting symptom, not a cosmetic one.
- Missing caps and spark arrestors. A long idle season invites bird nests and bees, and the dry Santa Ana wind periods leave the flue open to debris. An exterior spark arrestor is a genuine safety concern in this fire-risk region, not an upsell.
- Seismic damage to original masonry. The stucco-clad stacks and decorative rooftop chimney pots on 1920s Spanish Revival homes crack and shed stucco after nearby shaking. It’s a structural finding that a Level 2 inspection picks up.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Beverly Hills, CA
Pricing here is set per job by a written estimate, and the estimate is free. A typical annual sweep and inspection in Beverly Hills runs around $175 to $325 for a single flue. A Level 2 inspection with video scanning typically lands between $250 and $475, and it’s more on a house with multiple flues because each one gets scanned. Fireplace cleaning with soot removal runs roughly $150 to $300 depending on how much decorative finish needs protecting. A DuraFlex reline, if the inspection shows it’s needed, is a separate figure quoted from the camera findings. Nothing gets recommended without evidence you can see in your own photo report, and we’ll tell you plainly when work can safely wait until after the burn season. Call (833) 925-1856 for an exact quote.
We Also Serve Cities Near Beverly Hills
Our chimney sweep service reaches the neighborhoods around Beverly Hills too, including West Hollywood, Westwood, Toluca Lake and Sherman Oaks. The same inspection-first approach applies in each. If you’re just outside the city line, call and we’ll confirm coverage before we book.
Serving Beverly Hills, CA – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Sweep in Beverly Hills
Yes. Each fireplace and its flue is a separate system, and each one needs to be scanned and evaluated on its own. A three-fireplace house gets three sets of findings in one visit, with a combined photo report, so nothing gets assumed from the one flue that looks fine. Call (833) 925-1856 for an exact quote – estimates are free.
Because the problem is almost always airflow or an obstruction, not soot. A disconnected or rusted damper, a flue that’s undersized for the gas set, or a bird nest blocking a cold flue will push smoke into the room on a gas fire just as readily as on a wood one. A Level 2 inspection with video scanning finds which of those it is.
Once a year, on the same schedule as a heavily used one. Light use means less creosote, but the long idle months are exactly when nests, bees and debris build up, and annual NFPA 211 inspection is what catches a cracked clay liner before it becomes a water problem. Call (833) 925-1856 and we’ll book the sweep.
Often yes, and where the liner itself is cracked or deteriorated we can restore it with HeatShield ceramic resurfacing instead of a full rebuild. Glazed third-degree creosote gets mechanically removed, then the liner is evaluated on camera. If it can’t be saved, a DuraFlex stainless reline is the code-compliant route.
Book a Level 2 inspection before you patch it. Cracking and shedding stucco on a 1920s stucco-clad stack usually points to movement in the masonry beneath, often from seismic shaking, and patching over it hides the structural finding rather than fixing it. We tell you what’s under the stucco before recommending a repair.
What Happens When You Call
You’ll book a sweep or inspection with a flat price agreed up front, and a camera report with photos comes with the visit. If the findings call for a repair, the same crew that inspected handles it, so there’s no handoff to a second contractor. For chimney sweep work across Beverly Hills and the surrounding neighborhoods, we’re ready to book. Call (833) 925-1856 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Encino.