Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Beverly Hills, CA
We provide independent Gelco service across Beverly Hills, from the multi-flue caps on Spanish Revival rooftops in the Flats to the top-seal dampers in mid-century Trousdale Estates fireplaces. What makes our Gelco work here different is what we usually find: not heavy soot, but caps loosened by dry wind, dampers gasket-failed from months of idling, and firebox joints that have moved with the ground. Chimney Sweep Encino is an independent service provider. We are not affiliated with, authorized by, or a dealer for Gelco, and that independence is exactly why we can diagnose what’s actually installed and recommend a repair when a repair will do. Call (833) 925-1856.
Why Beverly Hills Residents Choose Us for Gelco Service
Gelco components have been installed in this city’s masonry fireplaces for a long time, and our technicians have up to 9 years of experience working on them. They know how a stack-style stainless multi-flue cap sits on a clay flue tile, how a top-seal damper seals against a firebox that’s slightly out of square, and how the hardware on both behaves after years of dry air and long idle stretches. Beverly Hills homeowners tend to ask good questions, and we like that. We tell you what we find, name the part, and explain the options.
Scheduling works the way you’d expect from a professional trade: we book a visit, arrive with the tools for a real inspection rather than a look-and-leave, and set the price per job in a written estimate you agree to before any work starts. The local pro we connect you with is licensed and insured as the state requires. If you’ve been told your Gelco assembly needs a full replacement, get a second opinion from an independent technician first.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Beverly Hills
Most of the Gelco calls we handle in Beverly Hills come down to one of five things. Each one ties back to how fireplaces actually get used here, which isn’t the way a cold-climate chimney gets used.
- Rusted or loose multi-flue caps. Years of dry Santa Ana wind exposure work the mounting screws loose on stack-style Gelco caps, and the stainless begins to pit. Once a cap lifts, birds, bees and debris drop straight into a flue that sits cold for months. We reseat or replace the cap and clear what got in.
- Seized top-seal dampers. A damper that hasn’t been cycled in a season can seize at the pivot or lose its gasket seal. The first fire of the year pushes smoke into the room instead of up the flue. We free the mechanism or replace the assembly, then check the draft.
- Corroded damper and firebox hardware. Gas logs put moisture into a firebox that never gets hot enough to dry out. That’s a slow corrosion engine on hinges, frames and panels, and it shows up as sticking dampers and rust streaks on the firebox floor.
- Cracked firebox panels and loosened smoke-chamber joints. Decades of minor seismic movement in original masonry stacks stress the joints in older Gelco assemblies. A smoke-chamber joint that has opened lets smoke spill at the shelf instead of climbing the flue.
- Cold-flue nesting and debris. With mild, mostly dry winters, chimneys here sit idle for long stretches. That gap is when nests and debris settle in, and the symptom is a smoky first light-up, not a soot problem. A camera inspection confirms it before anyone quotes a sweep.
Gelco Service in Beverly Hills: What Local Conditions Mean for Your Equipment
Here’s the part that surprises people who moved from a colder climate: the Gelco damper or firebox in a Beverly Hills home rarely fails from creosote overload. In the Flats and Trousdale Estates, fireplaces often burn gas logs or decorative sets year-round, so the firebox never gets hot enough to drive moisture out of the masonry. The failure mode is moisture and long idle stretches in a cold flue, and the symptom is a smoky draft rather than a choked chimney.
The typical call goes like this. A homeowner in a 1920s Spanish Revival or a mid-century Trousdale home lights a gas-log or decorative fire and gets smoke into the room instead of up the flue. The usual cause is a seized Gelco top-seal damper, a rusted multi-flue cap that let debris or a nest into the cold flue, or a loosened smoke-chamber joint in the original masonry. These are all common where fireplaces sit unused for months. A qualified local technician runs a Level 2 inspection with camera, clears the flue, frees or replaces the damper, and checks the cap and crown for the wind and stucco cracking these rooftops see.
Gelco Models & Products We Service in Beverly Hills
In Beverly Hills we work on the Gelco chimney caps, dampers and firebox components that turn up on this city’s masonry fireplaces: stack-style stainless multi-flue caps, top-seal damper assemblies, gas-log-ready firebox units, and the masonry firebox and smoke-chamber components on original brick hearths. Each job starts with identifying the assembly and its condition, not with a catalog.
We match OEM Gelco caps, dampers and firebox panels where the assembly is still serviceable, and use quality aftermarket components only when OEM is discontinued or priced past what the job justifies. If spalling brick or a cracked flue liner sits behind a failed Gelco firebox, the honest advice is to repair the masonry first rather than keep swapping parts. That’s part of the Gelco expertise we bring to every visit.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Beverly Hills
Pricing is per job and set by the written estimate, and the estimate itself is free. Here are typical local ranges so you can plan before you call. The written estimate sets the final price.
| Service | Typical estimated range |
|---|---|
| Level 2 inspection (camera, photo report) | $180 – $430 |
| Damper repair or freeing a seized top-seal | $185 – $390 |
| Multi-flue cap replacement (Gelco-style, stack unit) | $210 – $480 |
| Firebox panel or smoke-chamber component repair | $320 – $950 |
| Standard sweep (where light soot is actually found) | $140 – $270 |
What drives the number: how far a technician has to climb, whether the cap has to come off, whether the damper frees cleanly or needs replacing, and whether the firebox panel behind the failed joint is still available. You’ll see every finding on camera before any repair is agreed. Call (833) 925-1856 for an exact quote; estimates are free.
Serving Beverly Hills, CA – Our Local Coverage Area
We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Beverly Hills
Repair it if the stainless body is sound and only the fasteners and seating have failed; replace it if the metal is pitted through or the cap no longer covers the flues properly. On stucco-clad stacks that have shed material after nearby shaking, the base can be out of level and a new cap has to be bedded correctly to stay put. A technician can tell you which by looking at the metal and the flue tops. Call (833) 925-1856 to book an inspection.
Because the problem usually isn’t creosote. A seized top-seal damper, a debris-filled flue, or a smoke-chamber joint that has loosened with the masonry will spill smoke into the room regardless of how clean the flue is. Gas logs also produce moisture that helps a cold flue resist drafting up. A Level 2 inspection with camera shows which one it is.
Yes, and idleness is the reason to repair it rather than a reason to skip it. A damper that sits closed or half-seized for months is exactly where gaskets fail and pivots corrode, and a fireplace that only sees occasional use is one that never gets warm enough to dry itself out. Keeping it operating keeps the seal engaged and the flue closed to pests. Call (833) 925-1856 for an estimate.
You can, but it’s often the wrong first move. If the clay liner is cracked or shifted, the flue is a safety issue that a new firebox panel won’t fix. Our technicians inspect the full stack, report what they find on camera, and tell you plainly when a firebox repair can wait until the masonry work is done. That’s the honest sequence, not the fastest sale.
They do. Under dry wind conditions and surrounding fire risk, spark-arrestor screens and exterior spark containment matter more than they would in a wetter climate, so an inspection here includes the cap screen, the crown, and the exterior stack. A loose or rusted cap that lets nests in also lets sparks escape. Call (833) 925-1856 for an exact quote; estimates are free.
Service Areas Near Beverly Hills
We also connect homeowners with Gelco service in the neighborhoods around this city. That includes West Hollywood, Westwood, Encino, Toluca Lake and Lake Balboa. If you’re near the edges of the Beverly Hills area or just over the line in West Hollywood or Westwood, call and we’ll confirm coverage before booking.
Book Your Gelco Service in Beverly Hills Today
If your Gelco cap, damper or firebox is giving you smoke, stubborn hardware or a draft that doesn’t feel right, book a visit. We’ll run a Level 2 inspection, show you what the camera sees, and give you a written estimate before any work starts. Call (833) 925-1856. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Chimney Sweep Encino.