Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Encino Homeowners
If your fireplace has been burning all winter and you can’t remember the last time anyone looked at the flue, that’s the problem a sweep actually solves. Creosote builds up on the liner walls with every fire, and in a warm, dry climate like ours it hardens into a glazed, tar-like layer that a brush alone won’t touch. Our technicians have up to 9 years of experience, and we treat the sweep as a diagnostic visit, not a sales pitch. You get a flat price agreed before we book, a camera inspection with a photo report you keep, and a plain answer about what we found. Most sweeps in Encino can be scheduled same-day. Call (833) 925-1856.
What Our Chimney Sweep Service Includes
A sweep is the entry point to the whole system, but the system is what we’re actually looking at. Each visit below is a real service with its own scope, not a line item upsell.
Level 1 Inspection
A Level 1 inspection is a visual check of all readily accessible parts of the chimney and venting, done with the firebox open and the flue viewed from the top and bottom. It’s the right call when your setup hasn’t changed and you burn regularly, which describes most Encino homes with a wood-burning fireplace. We perform it alongside the sweep, note the condition of the damper, firebox panels, and visible flue, and put the findings in writing before we leave the property.

Level 2 Inspection
A Level 2 inspection adds a video camera run through the full length of the flue, and it’s what you want after a chimney fire, a change in fuel type, a new appliance, or a home purchase. It’s also the only way to see behind a liner that looks fine from the firebox. We run the camera, record it, and hand you the footage so you’re looking at the same condition report our technicians are.

Creosote Removal
Creosote is the residue of incomplete combustion, and it comes in stages from soft soot to a glazed shell that has the consistency of hardened varnish. Soft deposits come off with standard rotary brushing; glazed stage-three creosote needs chemical treatment and mechanical removal over more than one visit. We assess the stage during the sweep and tell you honestly whether what we’re seeing can be brushed out or whether it needs a longer process.

Soot Removal
Soot is the fine, powdery carbon that coats the firebox, smoke chamber, and damper shelf, and it travels. Left in place it stains the surrounding masonry, works into the room air, and dulls the draft. We remove it with HEPA-filtered vacuums so the living room stays as clean as we found it, then wipe down the firebox and glass where accessible. Soot removal on its own is often what a homeowner actually wants between full sweeps.
Annual Sweep
An annual sweep is the baseline maintenance schedule for a fireplace that sees regular use, and it’s the cheapest way to catch a cracked liner or a failing crown before it becomes a masonry repair. The sweep itself is a full flue brushing, firebox cleaning, damper check, and a condition report on the cap and crown. If we find nothing, we say so. We’re not going to invent a repair to justify the visit.
Fireplace Cleaning
Fireplace cleaning covers the firebox side of the system: ash removal, soot on the brick face and glass doors, the grate, and the smoke shelf above the damper. It’s a separate job from flue sweeping and often booked together, especially before a season of entertaining. We also check that the firebox panels and mortar joints are sound while we’re in there, since a cracked panel is a safety issue, not a cosmetic one.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Sweep
We name the materials we use, and we work with a defined set of professional-grade chimney products. On the liner side that means DuraFlex flexible stainless-steel systems, which we install where a code-compliant reline is needed without a full rebuild. We’re also certified to install HeatShield ceramic liner resurfacing, a factory-trained process that restores a deteriorating flue from the inside rather than replacing it. When you hire us, you know what’s going into your chimney and who made it.
For caps, crowns, and the formed metal components around the top of the system, we work with Copperfield and Famco parts, both of which hold up better in our dry, hot summers than generic stamped substitutes. We service and repair these systems and know where each one tends to wear: the top plate seam on a cap, the mortar bed under a crown, the joint where a liner meets the appliance collar. Whether your chimney has Famco, Copperfield, DuraFlex, HeatShield, or any other make installed, we can help.
Signs You Need Chimney Sweep Right Now
- You can smell smoke in the room when the fire is lit. A weak or blocked draft pushes smoke back into the house instead of up the flue, and a soot-clogged or partially obstructed flue is a common cause. It’s worth a look before your next fire.
- There’s a black, shiny coating inside the firebox. That glazed surface is stage-three creosote, and it’s the layer a brush won’t remove on its own. It needs to be assessed before you burn again.
- You hear a crackling roar that doesn’t sound like a normal fire. A chimney fire can sound like a low rumble or a freight train, and it can smolder unnoticed. Any suspicion is a reason to stop burning and get the flue inspected.
- Debris is falling into the firebox. Crumbling mortar, flakes of liner, or pieces of a failed crown dropping down the flue point to a system that’s deteriorating above you. That’s not something to shrug off.
- It’s been more than a year since the last sweep. Encino fireplaces get used through long dry seasons, and creosote accumulates whether or not you can see it. An annual sweep is the standard interval for a reason.
Our Chimney Sweep Process – Step by Step
- 1
We lay down protection and set up a contained work area. Drop cloths, a sealed vacuum connection, and a proper HEPA filtration setup mean the soot goes into the machine, not into your living room. It’s the first thing we do and the reason you don’t need to empty the room before we arrive.
- 2
We examine the firebox, damper, and accessible flue. Before any brushing, we take a look at the condition of what we can reach. The damper, firebox panels, smoke shelf, and the top of the flue get assessed and noted, because the repair history of a chimney usually starts here.
- 3
We brush the flue from the top with rotary equipment sized to the liner. The correct brush diameter matters: too small and it skips the corners, too large and it damages a liner. We select the brush to the flue we’re actually working in, then work the full length down to the smoke chamber.
- 4
We run the camera and record what we see. The video run is where the real information comes from. Cracks, gaps at joints, separation, and failed connections show up on camera, and you get a copy of the footage so the findings are yours to keep and compare against later.
- 5
We walk you through the report and write the estimate. Any recommended repair comes with the photo and video evidence that supports it, and a written estimate with a flat price. Nothing gets booked until you understand what we found and why it matters.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Sweep Cost in Encino?
A standard chimney sweep in Encino typically runs $180 to $340, and most jobs land in that range. Pricing here is per job by written estimate, so the number we quote is the number you pay.
| Service | Typical Estimate |
|---|---|
| Standard sweep with Level 1 inspection | $180 – $340 |
| Level 2 camera inspection | $280 – $520 |
| Creosote removal, glazed stage-three | $450 – $1,200 |
| Fireplace cleaning (firebox and glass) | $120 – $260 |
What moves the number: the stage of creosote, how accessible the flue is, whether you have a liner installed, and whether we’re finishing a repair on the same visit. To avoid overpaying, ask for the camera footage and the written condition report before you approve anything. We include both in the estimate at no charge, and we’ll tell you plainly when a repair can safely wait.
Chimney Sweep Near Encino – Our Service Area
We serve Encino and the surrounding San Fernando Valley communities, including Tarzana, Sherman Oaks, Lake Balboa, and Valley Village. We also work with homeowners in Topanga, Calabasas, Westwood, West Hollywood, Beverly Hills, Toluca Lake, and San Fernando. Scheduling is generally available within a few days, and same-day booking is often possible. Call (833) 925-1856. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. If you’re in one of our neighboring areas, see the chimney sweep page for Valley Village.
Serving Encino, CA – Our Local Coverage Area
We serve Encino and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Sweep in Encino
A chimney sweep is a professional cleaning of the flue, firebox, and smoke chamber to remove creosote, soot, and debris. It includes brushing the full length of the flue with rotary equipment sized to the liner, vacuuming with HEPA filtration, and a visual inspection of the system’s accessible parts. We also run a camera and provide a photo report with the findings, so the visit produces a real assessment rather than just a cleaning.
Most standard sweeps take about 60 to 90 minutes, and a sweep with a full camera inspection runs closer to two hours. If we’re dealing with glazed creosote or performing a same-visit repair, expect longer. We’ll give you a realistic time window when we book, and we don’t schedule back-to-back appointments that make us rush through yours.
A standard chimney sweep in Encino typically costs $180 to $340, and the written estimate sets the final price. Prices vary with creosote stage, flue accessibility, and whether the visit includes a camera inspection. Estimates are free. Call (833) 925-1856 for an exact quote.
Yes. We install DuraFlex flexible stainless-steel liner systems and we’re certified to install HeatShield ceramic liner resurfacing, which is a factory-trained process. We also work with Copperfield and Famco components for caps, crowns, and formed metal parts. When a liner has to be replaced, we can tell you which method fits your flue instead of defaulting to the most expensive option.
Yes, same-day booking is often available. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed on Saturday. A call outside dispatch hours is booked into the next opening. Call (833) 925-1856 to see what’s available.
Yes, our work carries a satisfaction guarantee. If something about the visit isn’t right, we come back and make it right. We don’t publish a number for work we haven’t yet performed; every job is covered by the written estimate and our guarantee before we start.
Clear the area around the hearth and move any fragile items off the mantle, and put pets somewhere out of the work zone. You don’t need to clean the firebox first; we handle ash and soot removal as part of the job. Make sure we have access to the roof, and have any paperwork or prior inspection reports handy so we can compare against what we find.
Schedule Your Chimney Sweep Service in Encino Today
Book a sweep ahead of the next fire season and find out the real condition of your flue before it decides your schedule for you. Every visit comes with a camera inspection, a photo report you keep, and a flat-price estimate agreed before we arrive. No obligation, no pressure. Call (833) 925-1856. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Encino.