Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for Encino Homeowners
A fireplace that smokes into the room, won’t light, or smells of soot when it’s cold outside usually has a problem you can name: a failing damper, a cracked firebox panel, a pilot that won’t stay lit, or a flue that no longer drafts the way it should. We repair all of those in Encino, and we tell you what we find before we recommend anything. Our technicians have up to 9 years of experience and treat every fireplace as part of a whole system, from the firebox floor to the crown on the roof, so a repair fixes the cause instead of hiding the symptom. We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday, with same-day repair often possible in Encino. Call (833) 925-1856 to book a visit.
What sets our fireplace work apart is material traceability. We name the products we install: a DuraFlex liner when the flue needs relining, HeatShield ceramic resurfacing when a firebox or smoke chamber can be restored instead of rebuilt, and Copperfield or Famco components where they’re the right fit. You’ll know what’s going into your fireplace and why, and the written estimate sets the final price before any work starts.
What Our Fireplace Repair Service Includes
Fireplaces fail in different ways depending on what burns inside them, so we handle gas, wood, and insert systems as separate scopes of work with their own diagnostics. Here’s what each repair covers.
Gas Fireplace Repair
Gas fireplaces fail most often at the ignition, the valve, or the venting, and the symptoms are usually obvious: a burner that won’t light, flames that lift or flicker yellow, or a unit that shuts itself down. We test the gas train, the pilot assembly, the thermocouple or thermopile, and the venting before touching anything, because a gas appliance that’s venting wrong is a carbon monoxide concern, not just a convenience problem. Any work on gas lines or the burner assembly is handled by a trained professional, and we’ll tell you plainly when a component needs replacement rather than adjustment.

Wood Burning Fireplace Repair
Wood fireplaces show their age in the firebox, the damper, and the smoke chamber, and a fire that smokes into the room usually points to one of those three. We inspect the firebox for cracked brick and deteriorated mortar joints, check the damper for a proper seal and free movement, and look at the smoke chamber for the rough, soot-packed surfaces that stall draft. Where the firebox or smoke chamber is sound enough to save, HeatShield ceramic resurfacing can restore the surface and smooth the chamber without a rebuild.

Fireplace Insert Service
An insert sits inside the firebox and depends on a correctly sized liner running the full height of the flue, so most insert problems trace back to the connection between the two. We pull the surround, inspect the liner, the collar connection, and the blower, and check that the unit is sealed to the fireplace opening rather than leaking around it. If the liner is failing, we install a DuraFlex flexible stainless-steel system sized to the insert so the installation is code-compliant without rebuilding the chimney.

Damper Repair
The damper is the plate that seals the flue when the fireplace isn’t in use, and a damper that sticks open or won’t open at all costs you heat in winter and lets cold air and pests in year-round. We check the frame, the pivot, and the seal, then repair or replace the assembly depending on where it’s worn. A damper that no longer closes is also a strong argument for a top-sealing cap, which we can discuss during the same visit.
Firebox Repair
Cracked firebox brick, crumbling mortar joints, and deteriorated refractory panels are the most common firebox problems we find, and they matter because the firebox is what keeps heat and embers away from the structure of the house. We assess the depth of the damage and the condition of the surrounding masonry before recommending a repair. Where the panels are sound enough, ceramic resurfacing restores the surface; where they aren’t, we rebuild the affected section.
Pilot Light Repair
A pilot that won’t stay lit usually means a dirty orifice, a failing thermocouple or thermopile, or a draft pulling the flame away from the sensor. We clean and test the assembly, measure the millivolt output where the unit calls for it, and replace the failed component rather than the whole control. If the pilot keeps going out after a repair, we look at venting and negative pressure in the room, because that’s often the real cause.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
We work with a defined set of professional-grade brands, which means you can ask exactly what’s going into your fireplace and get a straight answer. Our technicians are factory-trained on HeatShield ceramic resurfacing, a product-specific process for restoring fireboxes, smoke chambers, and liners that most sweep-only companies aren’t equipped to perform. We also install DuraFlex flexible stainless-steel liner systems, so a reline can be done without a full chimney rebuild in most cases.
On the component side we work with Copperfield and Famco parts where they’re the correct fit, and we service Olympia Chimney and Gelco products as well. We service the equipment rather than acting as a dealer for any of them, and we’ll tell you when a repair makes sense and when replacement is the better call. Whether you have a DuraFlex liner, a HeatShield-restored firebox, or any other make, we can help.
Signs You Need Fireplace Repair Right Now
Some symptoms can wait for a scheduled visit. Others shouldn’t, especially anything involving gas, strong smells, or smoke where it doesn’t belong.
- Smoke rolling into the room. A fireplace that smokes when it’s burning usually has a draft problem: a stuck damper, an undersized flue, or a smoke chamber that needs work. It also means combustion products are entering your living space instead of going up the chimney.
- A gas smell or a pilot that won’t stay lit. Any gas odor near a fireplace is a reason to stop using it and have it checked. A pilot that keeps going out often points to a failing thermocouple or a venting issue, and both deserve a professional look rather than a reset.
- Cracked firebox panels or crumbling mortar. Cracks in the firebox or the mortar joints around it can let heat reach materials that aren’t meant to take it. The earlier that’s caught, the simpler and less expensive the repair tends to be.
- A damper that won’t close or won’t open. A damper stuck open wastes heat all winter and lets cold air, debris, and animals down the flue. One stuck closed is a safety issue the moment someone tries to light a fire.
- Soot streaks, rust, or water stains around the firebox. These usually mean water is getting past the cap or crown and running down the flue. The fireplace repair won’t hold until the entry point up top is dealt with, which is why we check the whole system.
Our Fireplace Repair Process – Step by Step
Every repair starts with a diagnosis, and we don’t skip steps to get to a quote.
- 1
Book the visit. We answer 24/7 and schedule with fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. Same-day repair is often possible in Encino.
- 2
Inspect first, recommend second. We examine the firebox, damper, smoke chamber, flue, cap, and crown before discussing repairs. We use a camera to look inside the flue and document what we see, and we share the photos with you.
- 3
Explain what we found. We walk you through the condition report in plain language and separate what needs fixing now from what can safely wait. Nothing gets recommended without evidence you can see for yourself.
- 4
Write the estimate. You get a written estimate with the materials named, including the specific brand components where they apply. The written estimate sets the final price, and the estimate itself is free.
- 5
Complete the repair and confirm it. We finish the work, test the fireplace under load, and re-check the flue and draft before we leave. If the repair uncovered something bigger, we tell you then, not after the invoice.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in Encino?
Most fireplace repairs in Encino fall into a few common ranges, and the written estimate you receive after inspection is what sets your final price. These are typical estimates for the work involved, not a quote for your specific fireplace.
| Repair | Typical Estimated Range | What Drives the Price |
|---|---|---|
| Pilot light or ignition repair | $150 – $350 | Thermocouple or thermopile replacement, valve condition |
| Damper repair or replacement | $200 – $500 | Assembly type, frame condition, whether a top-sealing cap is added |
| Gas fireplace repair | $250 – $600 | Component access, valve and venting condition |
| Firebox repair or resurfacing | $600 – $1,800 | Extent of cracking, whether HeatShield resurfacing is enough or masonry must be rebuilt |
| Insert service and liner connection | $400 – $1,200 | Surround removal, liner condition, blower and collar condition |
What moves a price most is how far the damage has spread and how hard the component is to reach. A cracked firebox panel that’s caught early may only need resurfacing; one that’s gone unchecked often means masonry work behind it. Access matters too, since an insert has to come out before its liner connection can be inspected.
The way to avoid overpaying is to get the diagnosis before the price, and to ask what’s included. Every visit begins with a camera inspection and a photo report, so you can see the condition of the flue and firebox for yourself instead of taking our word for it. If a repair can safely wait until spring, we’ll say so. If you’re also due for routine maintenance, a quick look at our chimney sweep service will tell you what standard cleaning covers. The estimate is free, so call (833) 925-1856 for an exact quote.
Fireplace Repair Near Encino – Our Service Area
We work with homeowners across Encino and the surrounding neighborhoods, and we handle the same fireplace work in Lake Balboa and Valley Village, where we also offer fireplace repair and fireplace repair for the same kinds of gas, wood, and insert systems. If you’re in Tarzana, Sherman Oaks, or further out toward Topanga or Calabasas, ask about scheduling when you call. Dispatch runs from 7am to 7pm, Sunday through Friday.
Repairs here tend to be about drafts and aging masonry more than anything dramatic. Encino’s warmer months mean fireplaces sit idle for long stretches and then get used heavily once the evenings cool, so a stuck damper or a pilot that won’t hold is usually discovered right when you want the fireplace most. Getting to it early keeps a small fix from becoming a firebox rebuild.
Serving Encino, CA – Our Local Coverage Area
We serve Encino and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in Encino
Fireplace repair is the diagnosis and correction of faults in the fireplace itself: the firebox, damper, burner and ignition, insert connection, and the surrounding masonry. It’s the companion to chimney work, since a problem up top often shows up inside the firebox and a problem inside the firebox often needs the flue checked. We treat them together, from the crown down to the firebox floor, in one visit.
Most repairs take a couple of hours, and the diagnosis takes under an hour. A pilot or damper repair is usually a single visit, while firebox resurfacing and relining depend on drying time and the extent of the damage. We’ll give you a realistic window with the written estimate so you know what to plan for.
A typical fireplace repair in Encino runs $150 – $600 for ignition, damper, and gas fireplace work, while firebox repair and resurfacing range from $600 – $1,800 depending on how far the damage has spread. Access, component condition, and material choice drive the number. The written estimate sets the final price, and the estimate is free, so call (833) 925-1856 for an exact quote.
Yes. We install DuraFlex flexible stainless-steel liner systems and we’re factory-trained on HeatShield ceramic resurfacing. We also work with Copperfield, Famco, Olympia Chimney, and Gelco products. Whether you have one of those or another make, we can help.
Same-day repair is often possible in Encino, depending on the part needed and what the inspection turns up. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday, closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Every repair is backed by our satisfaction guarantee, and the materials we install carry the manufacturer’s own coverage. You’ll find the specifics of what’s covered on your written estimate before any work begins. If something we worked on doesn’t perform the way it should, call us and we’ll come back out.
Clear the hearth and the floor in front of the fireplace, move anything breakable off the mantel, and keep pets and children away from the work area while we’re there. Hold off on burning for at least 24 hours before the visit so we can inspect the firebox in a clean state. If you have a gas fireplace, know where the shutoff valve is and make sure we can access it.
Schedule Your Fireplace Repair Service in Encino Today
A gas smell, a smoking fireplace, or a damper that won’t move is worth a professional look, and a repair that’s caught early usually costs far less than one that’s left to spread. Call (833) 925-1856 for a free estimate. We answer 24/7 with fast dispatch from 7am to 7pm, Sunday through Friday, and we’ll tell you honestly what we find.
Written by the team at Chimney Sweep Encino.