Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Encino Homeowners
Encino’s mild winters mean fireplaces get used in short, intense stretches – a few cold nights, a long gap, then another stretch. That pattern hides problems. Creosote builds in layers, then sits undisturbed for months, and a crack in the flue or a crown that’s pulling away from the masonry can go unnoticed until the next season. A proper inspection finds those things before they become repairs. Our technicians have up to 9 years of experience, and they inspect the whole system from the crown to the firebox, not just the flue. We name what we find, show you the evidence, and tell you plainly when work can wait. Call (833) 925-1856 – same-day appointments are often available.
What Our Chimney Inspection Service Includes
A chimney is a system, and each level of inspection looks at a different amount of it. We offer all three NFPA-defined levels, plus camera work, a focused flue assessment, and the kind of inspection a real estate transaction needs. Every one of them ends with a plain-language report and photographs you can look at yourself.
Level 1 Inspection
A Level 1 inspection covers the readily accessible parts of the chimney and venting: the firebox, damper, smoke chamber, flue from below, and the exterior at ground level or from a ladder where it’s safe. You need it when you’re using the fireplace normally and nothing has changed – it’s the annual check that catches creosote buildup and early deterioration. We read the flue, check the damper operation, and note anything that needs attention before it becomes a repair.
Level 2 Inspection
A Level 2 inspection goes further into concealed areas, typically with a camera, and includes the attic and crawl spaces where the venting passes through. It’s the right call after a chimney fire, after an earthquake or major storm, when you’ve changed fuel type or appliance, or when you’ve just bought the home. We perform this level as a standalone diagnostic so you get the findings before anyone talks about repair work.
Level 3 Inspection
A Level 3 inspection is targeted and invasive – it’s done when the first two levels point to a problem inside a concealed space that can’t be assessed any other way. That can mean opening a wall, removing part of the crown, or accessing a chase. We only recommend it when the evidence justifies it, explain exactly what will be opened and why, and make sure you understand what the access will involve before we touch anything.
Camera Inspection
Camera inspection is how we see what the eye can’t reach: flue offsets, the smoke chamber, and the transition where the firebox meets the first flue tile. We run a camera down the flue and record what it shows. You see the same footage we do, which is the point – you shouldn’t have to take our word for a cracked tile or a gap in a joint.
Flue Inspection
A focused flue inspection evaluates the liner itself: its condition, its sizing relative to the appliance, and whether joints and seams are intact. It’s what we do when a fireplace drafts poorly, when smoke rolls into the room, or when there’s a question about whether the existing liner is sized correctly. If the flue needs relining, we install DuraFlex flexible stainless-steel systems, which lets us restore compliance without a full rebuild in many cases.
Real Estate Inspection
A real estate inspection is a Level 2 performed for a purchase or sale, documented so both sides can see the condition of the system before closing. It gives a buyer an honest picture of what they’re taking on and gives a seller something concrete to respond to. We don’t inflate findings to generate repair work, and we tell you when a chimney is simply due for a sweep and nothing more.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
We work with a defined set of professional-grade product lines, because material traceability matters when you’re talking about a liner that has to hold up for decades. DuraFlex flexible stainless-steel liner systems are a core part of our relining work; we know how those liners seat, how they handle offsets, and what to check at the top plate and the appliance connection. HeatShield ceramic resurfacing is a factory-trained skill set for us – it lets us restore a deteriorating liner by resurfacing rather than replacing, which is a category of work most sweep-only shops aren’t equipped to perform at all.
On the component side, we inspect and work with Copperfield caps and crown materials, and with Famco venting and termination components where they’re installed. Knowing how a specific cap or crown assembly is built tells us what to look for when we’re up top – where caulk lines fail, where a cap’s screening has corroded through, where the crown material has separated from the masonry. Whether your chimney has Famco, Copperfield, DuraFlex, HeatShield, or any other make, we can help.
Signs You Need Chimney Inspection Right Now
- You haven’t had it inspected in over a year. Annual inspection is the baseline for a fireplace in regular use. Creosote accumulates whether or not you can see it, and a slow deterioration behind the firebox won’t announce itself.
- Smoke rolls back into the room. Poor draft usually points to a flue problem: an obstruction, a sizing issue, or damage that’s disrupting airflow. It won’t fix itself, and it’s the kind of symptom a camera inspection resolves quickly.
- There’s a strong, sour smell when the fireplace is idle. That smell often comes from creosote or from moisture getting into the chimney through a failed crown or cap. Both are worth investigating before the next burn.
- You’ve had a chimney fire, even a small one. Many chimney fires are quiet – a whoosh, a lot of smoke, then nothing. Even a minor fire can crack flue tiles, and a Level 2 inspection is the standard response afterward.
- You just bought the home, or you’re about to sell it. A real estate inspection gives you documented condition before money changes hands. It’s the cheapest way to avoid inheriting someone else’s deferred maintenance.
Our Chimney Inspection Process – Step by Step
- 1
We talk through the history first. How often you burn, what you burn, whether you’ve noticed smoke, smell, or staining, and whether any work has been done on the chimney. That conversation shapes what we look at most closely.
- 2
We inspect the firebox, damper, and smoke chamber from inside. We check the damper’s operation and seating, look for cracks and gaps in the firebox masonry, and examine the smoke chamber, which is where a lot of drafting problems originate.
- 3
We work the flue with a camera and a light. Depending on the level of inspection, we read the flue directly or run a camera through it, checking for cracked tiles, open joints, gaps at offsets, and the condition of any existing liner.
- 4
We go up top to the crown, cap, and flashing. The exterior tells you what’s getting in. We check the crown for cracks and separation, the cap for corrosion and secure attachment, the flashing where the chimney meets the roof, and the masonry for spalling.
- 5
We write it up and walk you through it. Photographs, findings, and a clear recommendation: what needs attention now, what can wait, and what it would take to fix. No repair conversation starts until you’ve seen the evidence, and inspections are handled as their own service rather than a lead-in to a sales pitch.
When the inspection is part of keeping up with the system, it pairs naturally with a routine sweep. You can read more about that side of the work on our Chimney Sweep Encino page.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in Encino?
A typical Level 1 inspection in Encino runs $150-$250, and a Level 2 with camera work typically runs $250-$450 depending on the access and how much of the system has to be opened up. A real estate inspection generally falls in the same range as a Level 2. Level 3 work is priced per job once we know what has to be opened.
| Service | Typical Encino Range |
|---|---|
| Level 1 Inspection | $150 – $250 |
| Level 2 Inspection (camera) | $250 – $450 |
| Flue Inspection | $150 – $250 |
| Real Estate Inspection | $250 – $450 |
| Level 3 Inspection | Priced per job after assessment |
What moves the price: the level of inspection, whether the roof is steep or the chimney is hard to access, whether the crown or cap has to be dismantled to see inside, and whether the flue has multiple offsets that take longer to read on camera. You avoid overpaying by knowing which level you actually need – a Level 1 isn’t going to tell you what a Level 2 will, and paying for a Level 3 you don’t need is money wasted. Our estimates are free, and the written estimate sets the final price. No surprises added afterward.
Chimney Inspection Near Encino – Our Service Area
We work with homeowners across the San Fernando Valley and the surrounding hills, including Tarzana, Sherman Oaks, Lake Balboa, Valley Village, and out toward Topanga. Response is general to the area and depends on access and scheduling, but inspections are usually booked within a day or two. If you’re nearby and want to compare levels, our chimney inspection page covers what each one involves in more detail, and our chimney inspection page covers the same for Valley Village.
Serving Encino, CA – Our Local Coverage Area
We serve Encino and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in Encino
A chimney inspection is a documented assessment of your whole chimney system – firebox, damper, flue, crown, cap, and the exterior masonry – to confirm it’s safe and code-compliant. It’s not a cleaning; it’s a diagnostic that tells you the condition of what you have. We inspect first and recommend second, so the findings come before any repair conversation.
A Level 1 typically takes about 45 minutes to an hour, and a Level 2 with camera work usually runs 60 to 90 minutes. Level 3 timing depends on how much access is required. We’ll give you a realistic window when you book so you can plan your day.
Most inspections run $150-$450, with Level 1 at the lower end and Level 2 or real estate work at the higher end. The level you need drives the price more than anything else. Call (833) 925-1856 for an exact quote – estimates are free.
Yes – DuraFlex flexible stainless-steel liner systems and HeatShield ceramic resurfacing are both core parts of our work, and HeatShield installation is a factory-trained skill set for us. We know where those systems tend to wear and what to check at the connections. If your chimney uses those materials, we can inspect and assess them directly.
Same-day appointments are often available. We answer 24/7 for scheduling, and fast dispatch runs from 7am to 7pm, Sunday through Friday; we’re closed Saturday. A call outside those dispatch hours is booked into the next opening.
We stand behind our inspections, and any repair we recommend is covered by the terms in your written estimate. We’ll put that in writing before work begins so you know exactly what’s covered. Our chimney inspection page lays out the full service for anyone who wants to read up before calling.
Clear the fireplace area of furniture and anything sitting in front of the hearth, and don’t burn for 24 hours before the appointment so the firebox is cool. If you know the history of the chimney – past repairs, a chimney fire, a change of appliance – tell us when you book. Access to the attic or crawl space is helpful for a Level 2, so let us know if that area is locked or stored full.
Schedule Your Chimney Inspection Service in Encino Today
If your fireplace has gone a season without a look, or you’re buying a home and want the chimney documented before closing, call (833) 925-1856. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Our estimates are free, and the written estimate sets the final price. No-obligation, no pressure to repair.
Written by the team at Chimney Sweep Encino.