Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Calabasas?
Chimney cleaning in Calabasas typically costs $225 to $450 for a standard sweep of a single flue, and most homes land near the middle of that range. A two-story chimney, a heavy creosote load, or a flue that hasn’t been touched in several seasons can push the job to $450 to $700. If an inspection turns up cracks in the liner or a failing crown, that’s a separate repair conversation, and we give you the written estimate before any of it begins.
The price you pay in Calabasas is set by the written estimate for your specific chimney, not by a flat rate over the phone. We inspect first and recommend second, so the number you get reflects the condition of your actual system, crown to firebox. Call (833) 925-1856 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Key Takeaways
- A standard single-flue sweep in Calabasas runs $225 to $450.
- Heavy creosote, tall chimneys, and multi-flue homes cost more, up to $700.
- An inspection paired with the sweep adds roughly $75 to $175 and tells you what shape your liner and crown are really in.
- A chimney that fails inspection may need liner resurfacing or a stainless reline, which runs far higher than a sweep.
- Estimates are free, and the written estimate sets the final price.
Chimney Cleaning Cost Breakdown (2026)
Here’s how the numbers stack up for a Calabasas home. These are typical ranges for our market, and your written estimate is what actually sets the price.
| Line item | Typical range |
|---|---|
| Standard sweep, single flue, one story | $225 – $340 |
| Sweep with two-story roofline | $300 – $450 |
| Heavy creosote removal (third-degree glaze) | $400 – $700 |
| Multi-flue sweep (second and third flue) | $75 – $150 per additional flue |
| Standalone inspection (Level 1 or Level 2 with camera) | $75 – $175 |
| Chimney cap installation | $180 – $400 |
| Crown repair or rebuilding | $350 – $1,200 |
| HeatShield ceramic liner resurfacing | $1,400 – $3,200 |
| DuraFlex stainless-steel liner installation | $2,500 – $5,500 |
What drives the number up or down? Volume of creosote is the biggest single factor. A fireplace used a few times a month through a mild Calabasas winter builds a light, brushable layer. A fireplace that’s the main source of heat for years on end builds glazed, tar-like creosote that takes rotary tools and far more time. Chimney height and roofline access matter too. A single-story ranch with a low pitch is quick work. A tall two-story stack over a steep roof takes longer and needs more careful setup.
The other factor that changes the price is what we find while sweeping. This is where a sweep-only outfit and a full-system specialist part ways. We cover five distinct service categories, from the firebox to the chimney crown, so if the inspection shows a cracked flue tile or a cap that’s rusted through, the same crew can tell you what it takes to fix it. Nobody hands you off to a second contractor. For a broader look at our full range of work, see Chimney Sweep Encino.
What Affects Chimney Cleaning Pricing in Calabasas
Six things move the price of a chimney cleaning here more than anything else.
- How much you burn. Calabasas winters are mild, so many fireplaces see a fire a few nights a week at most. Run yours harder than that, or burn unseasoned wood, and creosote builds faster and the sweep takes longer. A homeowner burning daily through the cooler months will pay toward the top of the range.
- Chimney height and roof access. A tall stack set back over a steep roof means more careful staging, more time, and a higher price than a short flue you can reach easily.
- Number of flues. A single fireplace is one flue. A fireplace plus a furnace flue plus a second fireplace, common in the larger homes tucked into the canyons and hillside neighborhoods around Calabasas, each needs its own sweep. Each additional flue adds $75 to $150.
- Creosote condition. Light soot brushes out. Glazed, hardened creosote has to be broken down and removed with more equipment. That’s the $400 to $700 tier.
- Whether an inspection is included. A sweep clears the flue. An inspection tells you whether the liner, crown, cap, and firebox are safe and code-compliant. We treat inspection as its own diagnostic service, so you get an honest condition report before anyone talks about repairs. A Level 2 inspection with a camera adds $75 to $175.
- What the sweep turns up. A cracked flue tile, a failing crown, or a disconnected liner changes the job from cleaning to repair. Name-brand materials like DuraFlex liners or HeatShield resurfacing are priced separately, and we quote those in writing before we start.
One thing that doesn’t change the price: the day you call. The price is set per job by the written estimate, and our technicians have up to 9 years of experience diagnosing these systems. When you’re ready, call (833) 925-1856. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Why We Inspect Before We Recommend
A cleaning tells you the flue is clear. An inspection tells you whether the system is safe to use. Those are two different questions, and they deserve two different sets of tools.
We run chimney inspection as a standalone service, not a lead-in to a sales pitch. If your sweep comes back clean and your liner and crown check out, that’s the answer, and we tell you so. If we find a problem, we show you what we found and give you the repair options in writing. This matters in Calabasas homes that sit on hillsides and canyon edges, where wind exposure works on caps and crowns year after year. A cap that’s loosened or a crown with a hairline crack lets water into the flue. Over time, that damages the liner.
When the inspection points to a repair, we handle it with the same crew. Liner restoration with HeatShield ceramic resurfacing is a factory-trained, product-specific process most sweep-only shops simply aren’t equipped for. Where full relining makes more sense, we install DuraFlex flexible stainless-steel liner systems, which brings a failed flue back to code without the cost of a full rebuild. Caps, crowns, firebox work, and structural repair all fall inside our five core service categories: chimney sweeping, chimney cap and crown installation, fireplace repair, chimney repair, and chimney inspection.
We name the materials we install. Our product set is DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That gives you material traceability and manufacturer-backed quality instead of anonymous bulk parts you can’t verify later.
How to Save on Chimney Cleaning
The honest answer is that a sweep costs less than a repair, every single time. Keeping the chimney clean and having it inspected on a regular schedule is the cheapest path forward. Here’s what actually helps.
- Book before the first cool night. When the weather turns and everyone wants their fireplace ready, schedules fill. Booking in the shoulder season means easier scheduling and less chance of putting the sweep off another year.
- Burn dry, seasoned wood. Wet wood smolders and builds creosote faster, which means more frequent sweeps and a higher bill each time. Seasoned wood gives hotter, cleaner burns and less buildup to remove.
- Sweep before the glaze sets in. Light soot is the $225 to $340 tier. Glazed creosote is the $400 to $700 tier. Regular cleaning keeps you in the lower band.
- Get the inspection done at the same visit as the sweep. A standalone inspection is fair value, but pairing the two means one visit and one staging of the equipment.
- Ask for the written estimate and compare line items. A quote that only says “chimney cleaning” without breaking out the flue count, inspection, and any repairs is a quote you can’t compare. Ours are itemized.
- Take the free estimate. It costs you nothing to know your number. Call (833) 925-1856 and we’ll set it up.
Repair or Replace: What the Numbers Say
A sweep is a maintenance cost. A liner is a safety cost. When an inspection finds a compromised flue, the question becomes repair or replace, and the price gap is real. HeatShield ceramic resurfacing runs roughly $1,400 to $3,200 and restores a liner that’s still structurally sound. A full DuraFlex stainless reline runs roughly $2,500 to $5,500 and is the right call when the existing flue can’t be restored. A full chimney rebuild costs more again, which is exactly why relining exists: it gets you to code without tearing the stack down.
That’s a lot of money to weigh on a phone call. That’s why we inspect first. You get the condition report, the photos, and the options before you commit to anything. Reading more on how we handle these systems can help you know what to ask about, and the guides across our site cover the full picture. Our technicians have up to 9 years of experience with this work, and they’ll walk you through what they find in plain language. For related work on the parts of the system that take the most punishment, look at our chimney repair and fireplace repair services, and our guide to chimney inspection explains what a proper diagnostic visit covers.
What’s Included in a Chimney Sweep in Calabasas
A proper sweep isn’t a quick brush from the roof. Here’s what a professional cleaning involves, and why it’s priced the way it is.
We protect the firebox and the room around it with drop cloths and a vacuum before any work starts. We sweep the flue from the top and clean the firebox, smoke shelf, and damper area from below. We remove the soot and creosote and haul it away. While we’re in the flue, we check the condition of the liner, the damper, and the crown. Any obstruction, whether a bird’s nest, a leaf load, or a cracked tile that’s fallen in, comes out. This is why a two-story chimney costs more than a one-story: the roofline and the flue length both add time.
For homes with more than one flue, each one is its own job. Furnace flues, second fireplaces, and wood stove flues all need their own sweep. We itemize them on the estimate so you know exactly what you’re paying for.
Safety comes first with this work. The inside of a chimney and its liner are not a do-it-yourself repair. Creosote is highly combustible, and a flue that’s running too hot or has a cracked liner is a genuine fire risk. Trained professionals have the tools and the training to handle it safely, and they can tell you what’s actually wrong rather than guess. If you’re concerned about the condition of your chimney, have it looked at. Call (833) 925-1856.
Chimney Cap and Crown Costs
Caps and crowns are two of the most common findings on a Calabasas inspection, and they’re the first line of defense against water getting into the flue.
A chimney cap keeps rain, birds, and debris out of the opening. A cap in good condition with a stainless mesh screen runs roughly $180 to $400 installed, depending on the size and style. A damaged cap lets water straight into the flue, where it soaks the liner and the firebox. The crown, the sloped concrete top of the chimney, sheds water off the stack. A crown that’s cracked or crumbling runs roughly $350 to $1,200 to repair or rebuild, depending on the extent of the damage. We stock and install brand-name components for both, including Olympia Chimney and Copperfield products, so you’re getting parts you can identify. More on this work is on our chimney cap installation page and our chimney crown repair page.
If your cap is missing or mangled, don’t wait for the next rain to tell you. Call (833) 925-1856 and we’ll take a look during your estimate.
How Often Should You Have Your Chimney Cleaned in Calabasas?
For most Calabasas homes, once a year is the right rhythm, and that’s based on how much you burn, not the calendar. A fireplace used regularly through the cooler months should be swept and inspected annually. A fireplace used a handful of times a year can stretch to every couple of years, but the inspection should still happen yearly so small problems get caught before they turn into liner replacements.
The reason is simple. The climate here is mild, so a lot of homeowners don’t burn enough to notice a slow buildup. A chimney can look fine from the hearth and still have a heavy creosote layer up the flue. That layer is what fires feed on. An annual inspection catches it while it’s still light and brushable.
If you can’t remember the last time your chimney was cleaned, that’s your answer. Book it. Read more on our guides to chimney sweeping and chimney maintenance to get a sense of what a maintenance visit covers.
Neighborhoods We Serve Around Calabasas
We work across Calabasas and the surrounding area. That includes the hillside streets off Calabasas Road and Park Granada, the homes tucked into the canyons along Mulholland Highway, and the neighborhoods near Old Town Calabasas. If you’re just over the line in Woodland Hills, Agoura Hills, Hidden Hills, Topanga, or West Hills, we cover those too. The pricing structure is the same across the area: estimate first, written price, no surprises.
Hillside homes around Calabasas often have taller stacks and steeper roof pitches, which can put them at the upper end of the sweep range. Wind exposure in the canyon pockets also works harder on caps and crowns. It’s worth asking about both during your estimate.
FAQs – Chimney Cleaning Cost
How much does chimney cleaning cost in Calabasas?
Chimney cleaning in Calabasas typically costs $225 to $450 for a standard single-flue sweep, with most homes landing in the middle of that range. Heavy creosote, tall two-story chimneys, and homes with multiple flues run $400 to $700. Call (833) 925-1856 for a free estimate that reflects your actual chimney.
Is chimney cleaning worth the money?
Yes, and the math makes it obvious. A sweep at $225 to $450 is a fraction of what liner resurfacing at $1,400 to $3,200 or a full reline at $2,500 to $5,500 costs. Regular cleaning and an annual inspection keep small, cheap problems from becoming expensive ones, and they keep a combustible creosote layer from building up in your flue. Call (833) 925-1856 to get on the schedule.
Can you fix a cracked chimney liner?
Yes, in most cases, and two routes cover almost every job. A liner that’s still structurally sound can often be restored with HeatShield ceramic resurfacing, typically $1,400 to $3,200. A flue that’s beyond resurfacing gets a DuraFlex flexible stainless-steel liner, typically $2,500 to $5,500. An inspection tells us which one you need. Call (833) 925-1856 and we’ll take a look.
Do I need a chimney inspection if I just want it cleaned?
You should have one, and it adds $75 to $175 to the visit. A sweep clears the flue, but it won’t tell you whether the liner is cracked, the crown is failing, or the cap is letting water in. We run inspection as its own diagnostic service, so you get an honest condition report before any repair conversation starts. Call (833) 925-1856 to book the sweep and inspection together.
How long does a chimney cleaning take?
A straightforward single-flue sweep usually takes about 45 minutes to an hour and a half, depending on chimney height, access, and how much creosote is in the flue. A heavy buildup or a multi-flue home takes longer. Scheduling is fast dispatch from 7am to 7pm, Sunday through Friday. Call (833) 925-1856 and we’ll give you a clear window.
Can you come today?
Often, yes. We offer same-day service when the schedule allows, and same-day pricing is set by the same per-job written estimate as any other day, with no premium added for it. Call (833) 925-1856. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Get Your Free Chimney Cleaning Estimate
If you want to know exactly what your chimney cleaning will cost, the fastest way is to have us look at it. Calabasas homeowners can call (833) 925-1856 for a free estimate, with upfront pricing and no pressure. We inspect first, tell you what we find, and give you the number in writing. If a repair is needed, the same crew handles it, crown to firebox, with named-brand materials you can trace.
Written by the team at Chimney Sweep Encino.
Pricing reflects the Calabasas market as of 2026. Chimney Sweep Encino offers free estimates – call (833) 925-1856.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Javier Hernandez"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Ramon Rodriguez"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Colleen Sullivan